MP Select Mini Wifi video

https://www.youtube.com/watch?v=wwTWyQCMEqs

Code for 3D Printing Scholars: E:WDQB XHD KDNMRVB YIE XHD ARQXEAX FRVP

From the video:
Tyler updates the firmware: https://www.youtube.com/watch?v=6KxNQob7Cok
http://mpselectmini.com/
Malyan link software: https://drive.google.com/open?id=0BxyFI3iDaicLYnc0eTRLZXZVQVU

Once again the weekly write up on the 3D Printing 101 video is running a little late due to editing, because I want these write ups to be publishing worthy. But while you wait for thathere's the second video this week answering questions that a number of commenters on my videos have asked for.

This was supposed to be just a quick, one shot, get it out there answer some questions sort of thing that in the end was more than 4 hours of editing, splitting things between 2 cameras and a video that was getting progressively out of sync with it's own audio.

There are other videos about doing this, but they kinda hit it at, in my opinion, too high a level. People need the nitty and the gritty, and that's what I try to cover in this video. So hopefully this helps some people.